3onedata IPS7110-2GC-8POE Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3onedata IPS7110-2GC-8POE. 3onedata IPS7110-2GC-8POE 4 pagina's. Ips7110 series industrial poe switch
Pagina afdrukken
2. It is needed to check the cable is damaged or not, factory
records and quality assurance booklet before cable laying;
3. The required cable specification, quantity, direction and
laying position need to match construction requirements, and
cable length depends on actual position;
4. All the cable cannot have break-down and terminal in the
middle;
5. Cables should be straight in the hallways and turning;
6. Cable should be straight in the groove, and cannot beyond the
groove in case of holding back the inlet and outlet holes.
Cables should be banded and fixed when they are out of the
groove;
7. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
8. It should have corresponding simple signal at both sides of the
cable for maintaining.
【Specification】
Technology
Standard: Support IEEE802.3, IEEE802.3u, IEEE802.3z/ab,
IEEE802.3x, IEEE802.1Q, IEEE802.1p, IEEE802.1D/W
Protocol: ARP, ICMP, TCP, DNS, HTTP, SW-Ring, Telnet, RSTP,
SNMP, LLDP
Flow control: IEEE802.3x flow control, back press flow control
POE Standard: IEEE802.3af/at
Function
Switch function: SW-Ring, QoS, 802.1QVLAN, RSTP, SNMP,
LLDP, Port Trunking, static multicast filter, port mirroring,
bandwidth management, broadcast storm control, port flow
statistics, upgrade online, up and download configuration file,
user name access system
SW-Ring: Support Single, Couple, Chain, Dual homing
Exchange attribute
100M forward speed: 148810pps
1000M forward speed: 1488100pps
Transmit mode: store and forward
System exchange bandwidth: 7.8G
MAC address table: 8K
Memory: 1M
Interface
Fast Ethernet Port: 10Base-T/100Base-TX auto speed control,
Half/full duplex and MDI/MDI-X auto detect
Gigabit Combo port: 1000Base-X SFP slot or 10/100/1000Base-
T(X)
Console port: RS-232 (RJ45 connector)
Alarm port: 2 bit 7.62mm terminal block, 1 channel relay alarm
output, Current load capacity 1A@24VDC
PoE Pin-out: 1/2(+), 3/6(-)
Transfer distance
Twisted cable: 100M (standard CAT5/CAT5e cable)
Multi-mode: 1310nm, 2Km
Single-mode: 1310nm, 20/40/60Km
1550nm, 80/100/120Km
Power supply
Input Voltage: 48VDC
Type of input: 4 bits 7.62mm terminal block
Support over-current protection: 4.0A (DC)
Support redundant power, reverse connection protection
Consumption
IPS7110-2GC-8POE
No-load consumption: 4.3W@48VDC
Full-load consumption: 123.6W@48VDC
IPS7110-2GC-4T-4POE
No-load consumption: 8.9W@48VDC
Full-load consumption: 114.4W@48VDC
- 4 -
Single PoE port maximum consumption: 30W@48VDC
Working environment
Working temperature: -40～75℃
Storage temperature: -40～75℃
Relative Humidity: 5%~95 %( no condensation)
Mechanical Structure
Shell: IP40 protect grade, metal shell
Installation: DIN-Rail mounting
Size (W×H×D): 70mm×160mm×130mm
Weight: 1.07kg
Industry Standard
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 3
EN61000-4-4 (EFT), Level 3
EN61000-4-5 (Surge), Level 3
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS, UL508 (Pending)
Warranty: 5 years