Con-Treat Grinder Dolly Veiligheids-, bedienings- en onderdelenhandboek - Pagina 7
Blader online of download pdf Veiligheids-, bedienings- en onderdelenhandboek voor {categorie_naam} Con-Treat Grinder Dolly. Con-Treat Grinder Dolly 15 pagina's. For 9" hand grinders
Pagina afdrukkenPage 6
34. Adjust the two cross knobs shown below until the grinding disk is sitting flat onto the floor. You can move the
grinder along the flor side to side and forward and backward to analyse if the disk is flat on the floor.
35. While adjusting you may find that the knobs become too tight to turn. If this is the case please loosen the top
bolt and let the main chassis move forward or back so the cross knob threads align with the side arms again
and re-tighten the bolt again.
36.
37. Next plug the Grinder lead into the socket coming from the control box.
38. Use the cable tie provided to clamp the main switch of the grinder in the on position. This must be removed is
the grinder is ever removed from the frame for safety.
39.
Finally cable tie up the spare cable from the hand grinder onto the handle.
Assembly instructions
Cross Knobs
Cable Tie the Switch in the
on Position