3onedata TNS5500D Series Snelstarthandleiding - Pagina 4
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 3onedata TNS5500D Series. 3onedata TNS5500D Series 5 pagina's. 12-port series layer 2 wall mounting industrial ethernet switch
Ook voor 3onedata TNS5500D Series: Snelle installatiehandleiding (4 pagina's), Snelle installatiehandleiding (4 pagina's), Snelle installatiehandleiding (3 pagina's)
Pagina afdrukken
Click "Login" button to login to the WEB interface of
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default user name and password of the device are
"admin".
If the username or password is lost, user can restore it to
factory settings via management software; all modified
configurations will be cleared after restoring to factory
settings, so please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
Gigabit
M12
10/100/1000Base-T(X), M12(Female),
LAN Port
8-Pin X-Coded, Automatic Flow Control,
Full/half Duplex Mode, MDI/MDI-X
Autotunning; support two groups of
Bypass
Gigabit
PoE
10/100/1000Base-T(X), M12(Female),
M12
8-Pin X-Coded, Automatic Flow Control,
Full/half Duplex Mode, MDI/MDI-X
Autotunning;
Single port supports up to 30W PoE
power output, PoE power supply Pin 1
and 3 are positive, 2 and 4 are negative
100M M12
10/100Base-T(X), M12(Female), 4-Pin
D-Coded, Automatic Flow Control,
Full/half Duplex Mode, MDI/MDI-X
Autotunning
100M
PoE
10/100base-T(X), M12 (Female), 4-Pin
M12
D-Coded, automatic flow control,
full/half duplex mode, MDI/MDI-X
automatic detection; The single port
supports up to 30W PoE power supply
output. Pin 1 and 3 of PoE power
supply are positive, while pin 2 and 4
are negative
Console port
CLI command line management port
(RS-232), M12(Female), 4-Pin D-Coded
Alarm
M12 (Female), 4-Pin D-Coded, support
interface
1 relay alarm output, current load
capability
is
1A@30VDC
0.3A@125VAC
Indicator
Power indicator, alarm indicator, running
indicator,
interface
indicator
Switch Property
Backplane
56G
bandwidth
Packet buffer
12Mbit
size
MAC Address
16K
Table
Power Supply
Model I
M12(Male), 4-Pin A-Coded
24VDC(18~36VDC),
polarity
Model III
M12(Male), 4-Pin A-Coded
24VDC(9~36VDC), support non-polarity
Model
II,
M12(male)，4-Pin A-Coded，
Model
IV,
110VDC (66~156VDC), support reverse
Model
V,
connection protection
Model VI
Power Consumption
Model II
Working Environment
Working
temperature
Storage
temperature
Working
humidity
Protection
grade
【Disposal of Waste Electrical and Electronic
Equipment (WEEE 2012/19/EU)】
or
(Applicable in the EU-member states)
indicator,
PoE
end-of-life equipment for the subsequent recycling, treatment
and environmentally compatible disposal, will help prevent
potential damage to the environment and human health,
facilitating the reuse, recycling and/or recovery of its
support
non-
component materials.
Private users should contact their vendor or municipal waste
management service and ask for disposal information.
Professional users should contact their suppliers and check
the terms of their selling agreement.
This product must not be disposed of with other commercial
waste.
Full-load(Without
PoE):
15.8W@110VDC
Full-load(With PoE): 124.6W@110VDC
-40~75℃
-40~85℃
5%～95% (no condensation)
IP67(metal shell)
The crossed-out wheeled bin
symbol on the equipment or its
packaging indicates that the
product, at the end of its
service life, shall not be mixed
with unsorted municipal waste
but
should
be
collected
separately, in accordance with
local laws and regulations.
A proper separate collection of