Damp2Dry PACD150 Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Damp2Dry PACD150. Damp2Dry PACD150 16 pagina's. 150 pint commercial dehumidifier
Pagina afdrukken
- 1. Table of Contents
- 2. General Information
- 3. Important Safety Instructions
- 4. Structure Diagram
- 5. Setup Instructions
- 6. Setup Instructions
- 7. Control Panel
- 8. Control Panel
- 9. Operating Instructions
- 10. Maintenance
- 11. Maintenance
- 12. Troubleshooting
- 13. Error Codes
- 14. Purchase/Maintenance Records
Changing the battery:
The battery allows the user to check the total working time of the unit
even when the unit is powered off. (Press the "T" button to check this.)
1. Remove the screws in
the four corners of the
control panel.
2. Once the screws are
removed, carefully lift the
control panel to access
the PCB.
3. On the PCB is a 6F22
9V battery. Remove the
battery and replace with
a new battery.
4. Refit the control panel
onto the PCB.
5. Replace the four screws.
Maintenance Notes:
• Check the electrical cord for damage before each use.
• Additionally, it is a good practice to check the drain hose on a
monthly basis for any obstructions. Disconnect and clear any debris
present, then reconnect the hose.
• When cleaning the surface of the unit, do not use any harsh or
abrasive cleaners. Additionally, do not expose the power cord/plug,
control panel, and/or motor to direct moisture.
maInTenanCe
(continued)
Battery
(6F22 9V)
-10-