ADDER AdderLink DV100 Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ADDER AdderLink DV100. ADDER AdderLink DV100 2 pagina's. Receiver unit; transmitter unit

Pagina afdrukken

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and

materials for a period of two years from the date of original purchase. If the product should fail to

operate correctly in normal use during the warranty period, Adder will replace or repair it free of

charge. No liability can be accepted for damage due to misuse or circumstances outside Adder's

control. Also, Adder will not be responsible for any loss, damage or injury arising directly or indi-

rectly from the use of this product. Adder's total liability under the terms of this warranty shall in

all circumstances be limited to the replacement value of this product.

Regulatory information

EMC directive 2004/108/IEC

This equipment has been tested and found to comply with the limits for a class A computing

device in accordance with the specifications in the European standard EN55022. These limits are

designed to provide reasonable protection against harmful interference. This equipment gener-

ates, uses and can radiate radio frequency energy and if not installed and used in accordance

with the instructions may cause harmful interference to radio or television reception. However,

there is no guarantee that harmful interference will not occur in a particular installation. If this

equipment does cause interference to radio or television reception, which can be determined by

turning the equipment on and off, the user is encouraged to correct the interference with one

or more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase

the separation between the equipment and the receiver. (c) Connect the equipment to an outlet

on a circuit different from that to which the receiver is connected. (d) Consult the supplier or an

experienced radio/TV technician for help.

FCC compliance statement (United States)

This equipment generates, uses and can radiate radio frequency energy and if not installed

and used properly, that is, in strict accordance with the manufacturer's instructions, may cause

interference to radio communications. It has been tested and found to comply with the limits for

a Class A computing device in accordance with the specifications in Subpart J of part 15 of FCC

rules, which are designed to provide reasonable protection against such interference when the

equipment is operated in a commercial environment. Operation of this equipment in a residential

area may cause interference, in which case the user at his own expense will be required to take

whatever measures may be necessary to correct the interference. Changes or modifications not

expressly approved by the manufacturer could void the user's authority to operate the equipment.

Safety information

• For use in dry, oil free indoor environments.

• Ensure that the twisted pair interconnect

cable is installed in compliance with all ap-

plicable wiring regulations.

Web:

www.adder.com

Contact:

www.adder.com/contact-details

Support:

forum.adder.com

Part No. MAN-QS-ALDV100-ADDER • Release 1.0d

• Do not connect the interconnect cable to

any other equipment, particularly network

or telecommunications equipment.

• Do not attempt to service the units yourself.

AdderLink DV100

User Guide

Your AdderLink DV100 package

The AdderLink DV100 allows you to extend HDMI digital video over a maximum of 50 meters of

twisted pair cable with the minimum of infrastructure and fuss. It is simply powered via USB from

the transmitter end, so that no additional power supply is required at the receiver, simultaneously

saving time and space as well as making installation very straightforward.

In addition to this brief guide, your package should contain the following:

Supplied items

ALDV100P package includes: 1 transmitter unit and 1 receiver unit

Receiver unit

What you may additionally need

This power kit is only required if the host

computer or other device with a USB

port cannot provide sufficient power.

Transmitter unit

PSU-LPV-KIT

External power

adapter and USB

adapter cable.