dams EVMB-1600 Montagehandleiding - Pagina 8

Blader online of download pdf Montagehandleiding voor {categorie_naam} dams EVMB-1600. dams EVMB-1600 9 pagina's. Back-to-back desks

Step 12

Once the cross beams are attached,

turn the desk over into its upright

position.

2 person lift, do not attempt to do

this without assistance, this could

result in injury or damage to the

product.

Step 13

Now position the desktop onto

the framework ensuring that the

scalloped edge of the desktop is at

the centre of the frame.

Align the holes in the desktop end

rails with the pre-drilled holes on the

underside of the desktop.

Use the wood screws supplied to

attach the top to the frame, if you are

using a cordless/power driver make

sure it is on a low torque setting.

NOTE

Use Ø5 x 20mm wood screws to

attach the top to the frame.