Conairphone FX3000 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Conairphone FX3000. Conairphone FX3000 9 pagina's. Caller id sport telephone with 10 memory dialing

Pagina afdrukken

LOCATION OF CONTROLS

1.Receiver Norm / High

10.Transmitter

2.Receiver

11.New Call LED

3.Hook Switch

12.Battery Compartment

4.Tone / Pulse Switch

13.LCD Display

14.Review Up ¶ Button

5.Keypad

15.Review Down ¿ Button

6.Memory Button

7.Store Button

16.Erase Button

8.Redial Button

17.Call Back Button

9.Flash Button

18.Ringer Hi/Lo/Off Switch

CONGRATULATIONS!

You have purchased a FX3000, Caller ID Sport Telephone with

10 Memory Dialing manufactured to the highest standards of

Conairphone™. Before installing and operating, be sure to read

this manual.

GENERAL INFORMATION

UNPACKING

This package contains:

•FX3000 Telephone with Caller ID

•Owner's Manual

•One (1) Fully Modular Coil Cord

•One (1) Fully Modular Telephone Line Cord (Long Straight Cord)

•One (1) Fully Modular Telephone Line Cord (Short Straight Cord)

•One (1) Quick Installation Guide

•One (1) Important Notice

•Two (2) Memory Index Labels

•Warranty Card (Part of the Owner's Manual)

If anything is missing or damaged, contact the place of purchase.

Keep the packaging to transport telephone.

For your reference, keep a record of the date purchased. Please

save the sales receipt for the warranty reference.

Date of Purchase

INSTALLATION INSTRUCTIONS

Follow these precautions:

a. Never install telephone wiring during a lightning storm.

b. Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

c. Never touch uninsulated telephone wires or terminals unless

the incoming telephone line has been disconnected at the

network interface.

d. Use caution when installing or modifying telephone lines.

TO INSTALL BATTERIES

Batteries are required for the Caller ID functions and Telephone

operations of the unit.

1. Open the battery door by pulling back the latch. Use a ball point

pen or paper clip to release the latch.

2. Insert four(4) AAA alkaline batteries (not included).

3. Snap the battery door back into place.

SETTING UP YOUR FX3000

DO NOT CONNECT the line cord to the wall outlet until the Caller ID

setup has been completed.

Once the batteries are installed, the LCD

shows 'ENTER LANGUAGE' followed by

a choice of 3 languages (English,Spanish,

French). If your display does not appear this way, press and hold

both[¶] and [¿] for 4 seconds.

The LCD will then display 'ENG ESP FRA'.

NOTE: The 'ENG' is BLINKING, Press

[¶] or [¿] to select 'ENG' 'ESP', or

'FRA'. Press [ERASE] to confirm.

Once the language is selected, if ENG is

selected, the LCD shows 'LCD

CONTRAST'.

Press [¶] or [¿] to adjust five levels (from

1 to 5, default is 3) contrast of LCD. Press [ERASE] to confirm.