Conairphone SW2514 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Conairphone SW2514. Conairphone SW2514 8 pagina's. Classic wallphone with caller id
Pagina afdrukkenTO INSTALL BATTERIES
Batteries are required for the Caller ID functions and Telephone operations
of the unit.
1. Open the battery door by pulling back the latch. Use a ball point pen or
paper clip to release the latch.
2. Insert four(4) AAA alkaline batteries (not included).
3. Snap the battery door back into place.
SETTING UP YOUR SW2514
DO NOT CONNECT the line cord to the wall outlet until the Caller ID
setup has been completed.
Once the batteries are installed, the
LCD shows 'ENTER LANGUAGE'
followed by a choice of 3 languages
(English, Spanish, French). If your
display does not appear this way, press and hold both [ ] and [ ] for 4
seconds.
The LCD will then display 'ENG ESP
FRA'. NOTE:The 'ENG' is BLINKING,
Press [ ] or [ ] to select 'ENG ESP',
or 'FRA'. Press [ERASE] to confirm.
Once the language is selected, if
ENG is selected, the LCD shows
'LCD CONTRAST'.
Press [ ] or [ ] to adjust five levels (from 1 to 5, default is 3) contrast of
LCD. Press [ERASE] to confirm.
5
Once the contrast is set, the LCD
shows 'ENTER AREA CODE' The first
digit '-' of the area code will blink.
Press [ ] or [ ] to enter the first digit
of your area code. Press [ERASE] to confirm and go to next entry.
Repeat above steps until 3-digit area code is set.
Once the area code is set, the LCD
shows 'ENTER TIME DATE'.
Press [ ] or [ ] to select the hour
digits.
Press [ERASE] to confirm and go to the next entry.
Press [ ] or [ ] to select the minute
digits.
Press [ERASE] to confirm and go to
the next entry.
Press [ ] or [ ] to select the month
digits.
Press [ERASE] to confirm and go to
the next entry.
Press [ ] or [ ] to select the date
digits.
Press [ERASE] to confirm.
The LCD shows 'TOTAL:00 NEW:00',
which means both the total call and
new call counter are zero.
6