Conambo K10C Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Conambo K10C. Conambo K10C 6 pagina's. Wireless headset

Pagina afdrukken

CONAMBO

K10C Wireless Headset

Make Life Sound Better

1.Welcome to your new Conambo Headset

We appreciate your choice of Conambo headset. Before

use, please read this manual carefully and keep for future

reference. To learn more and get support, welcome to visit

our official website: www.conambo.com, email us via

[email protected], or call us 86-755-88608031.

2.Important Safety Information

 Do not use the headset at a high volume for any

extended period to prevent hearing damage.

 Removal of the battery in the headset shall NOT b

conducted on your own.

 Do not expose the headset to moisture, extreme o

prolonged heat, cold, humidity, or other adverse

conditions. Clean the unit with a soft cloth or damp

chamois leather. Never use solvents.

 Keep the headset, accessories and packaging parts out

of reach of children to prevent accidents and choking

hazards.

 Do not drop, crush, bend or apply excessive force to the

device.

42029----3

3.Operations

 Charging the headset

The built-in battery is rechargeable and please use th

included micro USB cable to charge the headset by

connecting to a USB port of your computer, power bank or

into an USB AC adapter(requires 5VDC)

Turn off the headset before charging, while charging, the

red indicator stays on.

Once fully charged, the blue indicator will light on.

NOTE: Do not attach the charger mid-call. This will cause

the headset to reset, and the call will be sent back to the

phone.

 POWER ON

Slide the switch down, the blue indicator will flash once

and you will hear a voice prompt, "Power on".

 POWER Off

Slide the switch up, the red indicator will flash two times

and you will hear a voice prompt, "Power off".

 Pairing & Connection

Enter pairing mode

1) Auto enter pairing mode when you power on the

headset at first time, the blue and red indicator flashes

alternately and you will hear voice prompt, "pairing".

Or hold the Multi-Function Button for 5s until the blue

and red indicator flashes alternately when power on.

Connect your phone

1) Turn on the headset and enter pairing model(th

headset indicator flashes red and blue alternately), Put

on your headset and will hear "pairing" .

2) Put your cell phone in Bluetooth Search/Scan Mode.

3) Select "K10C" to pair. (Password is "0000" if needed.)

4) When connected, you will hear a voice prompt

"connected"and the blue indicator will flash once.

Pair and connect with second device

1) Turn off the Bluetooth function of the first device.

2) While your headset stays power on, hold the

Multi-Function Button for 5s until the headset enter

pairing mode, the headset indicator flashes red and blue

alternately.

3) Put your second device in Bluetooth Search/Scan Mode,

select "K10C".

4) When connected, you will hear a voice prompt

"connected"and the blue indicator will flash once.