Dan D'Agostino Momentum Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dan D'Agostino Momentum. Dan D'Agostino Momentum 11 pagina's. Hd preamplifier
Ook voor Dan D'Agostino Momentum: Gebruikershandleiding (13 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (10 pagina's), Gebruikershandleiding (15 pagina's), Gebruikershandleiding (11 pagina's)

Pagina afdrukken
cables that may have become disconnected. Inspect the cable to make sure it has not
been damaged. If it has been damaged, replace it.
4.
If you are using monoblock amplifiers, such as the Momentum M400 amplifier, make
sure both amplifiers are turned on.
5.
Swap the left-channel interconnect cable from the preamplifier to the amplifier with the
right-channel interconnect cable. If the malfunctioning channel now works but the other
channel does not, replace the defective interconnect cable with one of the exact same
type. You may have to replace both right and left cables to make sure they match.
6.
Swap the left-channel interconnect cable from the source device to the preamplifier
with the right-channel interconnect cable. If the malfunctioning channel now works
but the other channel does not, replace the defective interconnect cable with one
of the exact same type. You may have to replace both left and right cables to make
sure they match.
7.
Try using a different source device. If the alternate source device delivers sound
in both channels, it is likely the original source device is defective. Consult the
manufacturer of that source device or your dealer for further information.
8.
If possible, try using a different amplifier. If the alternate amplifier delivers sound in
both channels, it is likely the original amplifier is defective. Consult the manufacturer
of the amplifier or your dealer for further information.
9.
If all of these steps fail to restore sound, consult your dealer for service.
Preamplifier functions but remote control does not
Follow these steps in order. If one step succeeds in restoring the operation of the remote, stop
there and ignore the other steps.
1.
Simultaneously press the server and radio buttons on the remote control until the LED
flashes blue. This indicates that the remote is now re-paired with the preamplifier.
2.
If the re-pairing process does not work, change the batteries by removing the screws
securing the back plate of the remote, replace the batteries with fresh ones,
and then replace the back plate. Give the remote a few seconds to re-pair to
the Momentum HD Preamplifier.
3.
Check to make sure the Bluetooth antenna is securely fastened to the back of the
Momentum HD Preamplifier.
4.
If these steps fail to restore operation of the remote, consult your dealer.
MOMENTUM HD PREAMPLIFIER LIMITED WARRANTY
Dan D'Agostino Master Audio Systems, LLC warrants the Momentum HD Preamplifier against
manufacturing defects and defects in materials for five years from the date of purchase or six
years from the original date of shipment from Dan D'Agostino Master Audio Systems, LLC from
an authorized Dan D'Agostino Master Audio Systems dealer, subject to the conditions listed below:
1.
The warranty covers only new products purchased from an authorized
Dan D'Agostino Master Audio Systems, LLC dealer.
2.
The warranty is non-transferable and is valid only for the original purchaser.
3.
The warranty is valid only if the product has been used according to the instructions
in the owner's manual. Damage due to accidents or owner abuse or neglect is not
covered under this warranty.
4.
All service must be performed by an authorized Dan D'Agostino Master Audio
Systems dealer. Damage resulting from service by other parties is not covered
under this warranty.
5.
All products returned for service must be packaged in the original container and
must include a photocopy of the original purchase receipt. If the original container
has been lost or discarded, contact Dan D'Agostino Master Audio Systems, LLC for
a replacement.
6.
If the product must be shipped back to Dan D'Agostino Master Audio Systems, LLC
for warranty service, the customer shall pay shipping costs. Dan D'Agostino Master
Audio Systems, LLC will pay for return shipping.
7.
Before shipping the product to Dan D'Agostino Master Audio Systems, LLC for
service, the customer must first obtain a Return Authorization (RA) number by calling
Dan D'Agostino Master Audio Systems, LLC. The RA number must be marked
clearly on the side of the package.
8.
This warranty covers only defects in products made by Dan D'Agostino Master
Audio Systems, LLC. It does not cover incidental or consequential damages, or
damages to other products resulting from defects in Dan D'Agostino Master Audio
Systems, LLC products.
9.
U.S. residents: Depending on which state you live in, you may have other rights not
elaborated in this document. For further information, contact Dan D'Agostino Master
Audio Systems, LLC.
10.
Residents of other countries: Your authorized importer or dealer bears the direct
responsibility for warranty coverage of this product. Please contact your importer
or dealer with requests for service under warranty. Dan D'Agostino Master Audio
Systems, LLC will work with your importer or dealer to assure that the terms
of the warranty are fulfilled.
For questions on warranty and service matters, contact Dan D'Agostino Master Audio
Systems, LLC at: +1.480.575.3069 or [email protected]