Dan's Comp Front Load Stem Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dan's Comp Front Load Stem. Dan's Comp Front Load Stem 5 pagina's.

•

Loosen and remove the headset compression bolt and cap.

Note: Headset compression bolts and caps vary. Some styles

require an allen wrench, some require a ratchet and some require a

closed/open end wrench or an adjustable wrench.

Installing the new stem

•

Loosen the pinch bolts and slide the new stem down onto the

fork steerer tube.

These instructions are to be used as a guide only. Improperly installed parts may lead to severe injury or harm. We strongly recommend that

a properly trained bike mechanic handle all installations, adjustments and repairs on your bike. As always...Ride Safe!

AMain.com Inc.

Front Load Stem Installation

•

Slide the old stem upwards to remove it from the fork steerer

tube.

1-844-970-4269

www.danscomp.com

Page 2