ADDER AdderLink X50 USB Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ADDER AdderLink X50 USB. ADDER AdderLink X50 USB 18 pagina's.
Pagina afdrukken
Connections at the remote module
1 Place the remote module adjacent to the user location.
2 Attach the lead from the video
monitor to the video out socket
on the remote module.
To video
monitor
[MS2 variant only] Optionally
attach the lead from a second
video monitor to the upper video
out socket on the MS2 remote
module.
To secondary
video monitor
3 Attach the leads of up to four
USB devices (two of which are
usually a keyboard and mouse)
to the sockets located adjacent
to the video output connector.
To USB devices,
e.g. keyboard,
mouse, etc.
[MS2 variant only] Note: When connecting four USB devices to the unit,
ensure that their total power requirements do not exceed 1700mA (1.7A).
The USB standard states a maximum allowable current draw of 500mA
(0.5A) per device, although most devices remain well below this limit - USB
keyboards and mice typically require 100mA. Each X50 contains a self-
resetting fuse that will prevent damage by shutting down the unit if the
total power draw becomes excessive.
4 [MS2 variant only] Optionally attach
a serial device lead to the male
serial connector on the remote
module.
To RS232
serial device
See the Important note on page 5
8