Elite Acoustics Engineering StompMIX X6 Beknopte handleiding - Pagina 4
Blader online of download pdf Beknopte handleiding voor {categorie_naam} Elite Acoustics Engineering StompMIX X6. Elite Acoustics Engineering StompMIX X6 10 pagina's. 6 channels digital mixer with lithium battery and bluetooth
Pagina afdrukken"System" : "Routing"
Assign "Pre" or "Post" fader i.e.,
"Main Mix" Channel 1 through
Channel 6, signals to the Aux Sends.
You can also select either "Main" mix
or "Aux" mix as the source for the
XLR outputs.
LCut
LowM
"System" : "XLR out EQ"
Setting for EQ for the XLR outputs
when it is SET on "MAIN outputs"
"Encoder Select" (press to enable):
"Ch 1 EQ"
Adjust the EQ settings for which ever
channel is selected.
"Encoder Select" (press to enable):
"Ch 1 Insert"
Adjust the Insert settings for the
selected channel (Ch.1-4). Note: this
includes Notch Filter and Frequency,
Gain and Threshold settings as well
as an independent Noise Gate.
Xlr Out
Eq
Hi
idF
Mid
System
"System" : "Scenes"
Save and Recall up to 10 mixes i.e.,
"System" : "Input Levels"
Displays a bar graph for each
channel's input level. Adjust the
channel's "Gain" pot to set desired
It is best to set your input signal level
to be under -12db to avoid clipping
Encoder Select
(Channel 1 to Channel 5/6)
"Encoder Select" (press to enable):
Adjust the Insert settings for Channel
5/6. Note: this includes Gain and
Threshold settings as well as an
independent Noise Gate.
scenes.
level.
the input circuit.
"Ch 5/6 Insert"