Ducati Desmosedici 2008 Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Ducati Desmosedici 2008. Ducati Desmosedici 2008 7 pagina's. Bazzaz z-fi
Pagina afdrukken
4. Route the portion of the Bazzaz harness containing the power and neutral connectors toward the rear
of the motorcycle along the right side. Locate the factory harness rear brake light switch power supply
connector which can be found near the engine oil filler cap. Disconnect the factory harness connectors
and install the Bazzaz harness power supply connectors in line (photos 6 & 7).
Bazzaz Power Connector Installed
Photo 7
Photo 6
Factory Brake Light Connector
5. Continue to route the neutral sensor lead of the Bazzaz harness (white/blue wire with T-tap) to the
rear of the engine. Locate the factory harness neutral sensor wire (yellow/green) and crimp on a supplied
scotch lok connector onto this wire. Insert the Bazzaz neutral sensor T-tap connector into the scotch lok
and reinstall the factory harness connector onto the sensor at the rear of engine (photos 8 & 9).
Photo 8
Photo 9
Route the remainder of the Bazzaz harness containing the throttle position, injector connectors and
ground between the front and rear cylinders to the left side of the motorcycle.