AnyCubic 89590 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AnyCubic 89590. AnyCubic 89590 10 pagina's.

4.Touch the time icon to select the washing time, and then touch the start icon to start washing.

(If the lid has been removed during the operation, the program will be paused. And the program will

resume after cover back the lid.)

5.After the washing is completed, a beeping sound will indicate it's ﬁnished. After the model is washed, it is

suggested to air dry the model before proceeding to the next post-cure process.

Tips: After washing, please remove and and seal the washing bucket to avoid spilling the washing liquid.

Cure mode

(After washing, post curing can increase the strength of the printed objects.)

It is suggested to air dry the model before proceeding to the post-cure process.

1.Switch the machine to cure mode by touching the Mode on the front panel.

2.Align the curing table with the hole of the platform and install (The washing bucket needs to be removed

ﬁrst if it is on the platform). Place the objects on the curing table and cover the lid.

Note: Tear oﬀ the protective ﬁlm before use

Align the holes

The side with "ANYCUBIC" must

to face forward

②

①

The side with "ANYCUBIC"

needs to face forward