AnyCubic Kobra Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AnyCubic Kobra. AnyCubic Kobra 13 pagina's.
Ook voor AnyCubic Kobra: Handmatig (10 pagina's)
Pagina afdrukken
To avoid any unnecessary damage to the printer or individual injury, please
always follow the safety instructions when assembling and using the machine.
Please contact our customer service first if you have any problem after
receiving the products.
Be cautious when using the scraper. Never direct the scraper towards
your hand.
In case of emergency, please immediately cut off the power of Anycubic
3D printer and contact the technical support.
Anycubic 3D printer includes high speed running parts that can cause
injury.
Anycubic 3D printer generates high temperature. Do not reach the
printing area during operation.
It is recommended to use protection glasses when cleaning/sanding
the printed models to avoid small particles in eyes.
Keep the Anycubic 3D printer and its accessories out of the reach of
children.
Vapors or fumes may be irritating at operating temperature. Always use
the Anycubic 3D printer in an open and well ventilated area.
Anycubic 3D printer must not be exposed to water or rain.
Anycubic 3D printer is designed to be used within ambient temperature
ranging 8ºC-40ºC, and humidity ranging 20%-50%. Working outside
those limits may result in low quality printing.
Do not disassemble Anycubic 3D printer, please contact technical
support if you have any question.
Safety Instructions
4