AnyDATA ACT613 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AnyDATA ACT613. AnyDATA ACT613 14 pagina's. Vehicle gps tracker

HANDING THE

4.1 S

1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which

is located within 2 feet of the steering wheel.

2. The installation is very easy, just put the ACT613 to the OBD-II

connector in user vehicle.

3. The ACT613 will power on automatically from vehicle battery and start

initiation for WCDMA network access.

4. After install of device to vehicle, all services are served by server.

Figure 4.1: Installation of ACT613 in vehicle

4.2 P

OWER SUPPLY FROM VEHICLE

1. After insertion of ACT613 to OBD-II connector, the device has

automatically power-on with the car battery, typically 9~18V.

2. If the engine has off, then the device decide to power off the OBD

interface

unauthorized movement function.

If the engine has on, then the device work on the OBD interface

circuit, which is charge of gathering the vehicle information such

as fuel gauge, speed, engine RPM, and so on to report it to LBS

server via the WCDMA network.

GPS L

EHICLE

OCATOR

(

TYPICAL

circuit,

and

VEHICLE TRACKER Users Manual (ACT613)

13.5V)

run

the

WCDMA

with

GPS

for

11/14

the