Concierge ACMG10 Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Concierge ACMG10. Concierge ACMG10 4 pagina's.

Mounting your Concierge ACMG10

Your Concierge ACMG10 panel can be mounted using the Plastic Rear Cover or an

aftermarket 75 x 75 VESA mounting bracket. Prepare the location and cable access holes

as required for your specific application.

Rear Cover Mounting Bracket

1. Remove the rear cover screw at the top and place

the unit face down on the supplied packaging

then gently prise off the cover starting from the

top left and right corners working your way down.

2. Secure the back cover to the mounting surface

and secure with screws appropriate for the

material using the 3 holes shown. Ensure that the

height of the screw heads is no more than 3mm.

3. Route the network and or power cables through

the cover as shown in the image to the right.

4. Plug and network and power connectors and

carefully press the ACMG10 into the rear cover

until it clicks. Gently squeeze each corner

between your thumb and forefinger until the

cover is completely in place. Re-install the screw

in the top of the panel.

+61 3 9012 6126

conciergedisplays.co



