Anysecu HD300 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Anysecu HD300. Anysecu HD300 10 pagina's. Uhf & wcdma dual mode radio

Shenzhen Anysecu Technology Co., Ltd.

◆Important Information

◆ Copyright

Anysecu authorized partners own the intellectual property of all the parts of this product (include accessories).

Any design and materials may not be modified, copied, extracted or translated without the authorization of us

or its authorized parities.

Due to the update or modification of the product, Anysecu owns the right to change the specifications of

software and hardware described in this manual without further notice. Specifications and information

contained in this manual are for reference only.

◆ Safety Information

Compliance with RF Exposure Standards

Your radio is designed and tested to comply with a number of national and international standards and

guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio

complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at

operating duty factors of up to 50% transmitting. In terms of measuring RF energy for compliance with the

IEEE and ICNIRP exposure limits, your radio radiates measurable RF energy only while it is transmitting

(during talking), not when it is receiving (listening) or in standby mode.

Your radio complies with the following of RF energy exposure standards and guidelines

Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992

Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition

International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998

◆ Operating Instructions to control RF Exposure

To decrease your exposure and ensure compliance with the occupational/controlled environment exposure

limits, please always adhere to the following procedures.

1. Transmit no more than the rated duty factor of 50% of the time. To transmit, press the PTT button, and to

receive the call, release the PTT button.

2. Keep your radio in a vertical position in front of the face with the microphone 5cm away from your mouth

while transmit.

3. When worn on your body, keep the antenna 2.5cm away from you body while transmit.

4. Do not transmit when the radio is not equipped with an antenna. Transmitting without an antenna may

damage the product and result RF discomfort.

◆ Using the designated accessories

Use the antenna, battery, adapter or charger supplied or sold by us only, or otherwise it causes damage to the

product.

If you want to purchase or replace the accessories, please contact your local dealer.

- 2 -