Anytek Q2N Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anytek Q2N. Anytek Q2N 3 pagina's. Full hd dash camera with g-sensor

Buttons function

Power / OK button: By short-pressing, the power button turns on the camera

and it turns off by long-pressing the power button. The OK button takes a photo.

Reset: When an unusual phenomenon happens caused by incorrect

operations, reset the camera before using it.

Menu: Short-press enters the video recording/photo/playback menu, and

long-press enter the video recording settings. Press once again to enter the settings

interface.

Right / Left buttons: Use these buttons as navigation. When you enter the

menu settings, the right buttons move the selection up, and the left moves down.

Video mode

Normal recording: When the camera is turned on and the video recording is in

the standby state, press the Power button to start recording. The recording icon

flashes indicating that the camera is recording.

Loop recording: Loop recording can be set as 1, 2, 3, or 5 minutes. When the

memory card is full, the first video will be automatically overwritten.

File protection: If you worry that the files can be deleted by mistake, you can

lock them. The locked files can not be deleted. If you want to delete then, you'll need

to format the memory card.

Connect to the computer

Connect the camera with your computer while the microSD card is inside. You

can choose between two memories: a camera and a microSD card.