ABTECH SAFETY SLIX100XL Instructie- en onderhoudshandleiding - Pagina 16
Blader online of download pdf Instructie- en onderhoudshandleiding voor {categorie_naam} ABTECH SAFETY SLIX100XL. ABTECH SAFETY SLIX100XL 20 pagina's.
Pagina afdrukken
Recommended Fitting of Horizontal Haul
and Lifelines to the Slix 100 Stretcher
Fig. 1.
Horizontal Haul Lifeline.
Attach the Security rope A to the Vertical Haul
Points 8 using a Double Fig 8 and two screw gate
karabiners.
Fit the Horizontal Haul Strops to a screw gate
karabiner D and then each leg of the Strop to the
Horizontal Haul Points C.
NOTE! Red to Red/Blue to Blue gives
attitude. Red to Blue/Red to Blue gives a Head
Down
attitude.
Attach the Haul Rope E to the karabiner D with a
Fig 8
knot.
Link the Security rope A to the Haul rope E with a
karabiner
F.
To avoid 3 way load attach the karabiner to
the loop of the Haul rope Fig 8 knot
NEVER into the Haul karabiner
Connecting like this
more horizontal attitude in the event of a Haul
rope or Security rope failure.
See p 14 for Important
Strop rigging information
16
a
D.
will
keep the Stretcher in a
Fig. 1
Note that Horizontal and Vertical
Haul Strops Are Now Supplied As
Sewn Slings to EN795 19978.
Instructions for attachment and
use are the same as rope
It is essential that the karabiner
used to attach the hauling slingsl
strops are Screw Gate karabiners
to a minimum of 25kN and a gate
opening of at least 24mm.
Head Up
Damage to the edge of the
stretcher WILL occur if smaller
gate opening karabiners are
Fig. 2 colour coded 25kN Sewn
Tapes
slings.
used.