AnyTone AT-310M Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AnyTone AT-310M. AnyTone AT-310M 12 pagina's.
Pagina afdrukken
HOW TO USE YOUR CB RADIO
1.
ON/OFF-Volume
a)To turn the set on, turn the knob (1) clockwise.
b)To increase the sound level, turn the same knob further clockwise.
2.
Manual Squelch
Turn the SQ knob(2) clockwise to the exact point where all background
noise disappears.
set this SQ control to the maximum (fully clockwise), the radio can
only receive the strongest signal.
3.
Automatic Squelch
The automatic squelch (ASQ ) uses a preset average value. It can be
activated by short key (5) [ ASQ ],The automatic squelch mode
icon) is indicated on the LCD.
4.
Channel selection
All channels can be selected by channel selector keys (8) [
4
[
].The selected channel is displayed on the LCD.
communication both transceivers (the receiving and transmitting party)
need to be in the same channel and under same modulation type.
5.
Modulation MODE selection
This key (6) [AM/FM] allows selecting the AM or FM modulation. Your
modulation mode has to correspond to the one of your correspondent.
With the version Full Multi Norm in the norm UK, you can
between the EU.band and the UK band, which is indicated by symbol
"EU" or "UK", by pressing the key (6) [AM/FM ].
The CB band EU consists of the 40 CEPT channels. The CB band UK
consists of 40 channels starting from 27.60125 MHz to 27.99125 MHz.
6.
Norm Selection
The version Full Multi Norm can be set by the user to the following
norms:
D 80 FM (26.565 - 27.405 MHz), 4 W
40 AM (26.965 - 27.405 MHz), 1W.
EU 40 FM (26.965 - 27.405 MHz), 4 W
40 AM (26.965 - 27.405 MHz), 1W.
EC 40 FM (26.965 - 27.405 MHz), 4 W.
UK 40 FM (27.60125 - 27.99125 MHz), 4 W
40 FM (26.965 - 27.405 MHz), 4W.
PL 40 FM (26.960 - 27.400 MHz), 4 W
40 AM (26.960 - 27.400 MHz), 4W.
E
40 FM (26.965 - 27.405 MHz), 4 W
40 AM (26.965 - 27.405 MHz), 4W.
US 40 AM (26.965 - 27.405 MHz), 4W.
(AQ
NZ 40 FM (26.330 - 26.770 MHz), 4 W
40 AM (26.330 - 26.770 MHz), 4W.
To change
current norm, please hold the key (6) [AM/FM ] while
] or (9)
turning the radio on. In the display, the symbol of the current norm
In
appears,
please select
key(8) [
radio off and on again, the radio automatically returns to
operation mode.
Note:
The norm is internally set to 40 channels FM, 4 Watts only.
7.
switch
Automatic Scanning
Press the key(10) [ SC ] to enable the SCAN function. Before enabling
the SCAN function, firstly turn the SQ control clockwise till the
background noise is cut out. Then press the key(10) [ SC ], radio will
automatically scan all channels and the SC icon will appear on the
LCD.
When a signal is detected on a channel, scanning stops on this
channel. You can receive the calling, and also, can transmit on this
channel by pressing PTT key. If there is no transmission or detected
signal on that channel within 5 seconds, radio will start scanning
the norm by pressing the channel selector
] or (9) [
]. To
verify
your selection, turn the
the selected