AnyTone AT-D578UV Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AnyTone AT-D578UV. AnyTone AT-D578UV 4 pagina's. Bluetooth(bt)
Ook voor AnyTone AT-D578UV: Geavanceerde instellingen (5 pagina's), Firmware bijwerken (17 pagina's)
Pagina afdrukken
Bluetooth(BT) UserGuide
Package contents
1.
Built-in bluetooth module
(inside the radio)
Velcro
Charging the BT Push-to-Talk (PTT) button
2.
When the indicator on the PTT is blinking red, the battery voltage is low.
Connect the USB charging cord into the BT PTT's USB charging port. If the
PTT is not fully charged, the indicator will turn solid red. When the indicator
turns off, the unit is fully charged. A fully discharged battery will need
approximately 1.5 hours to complete a full charge.
Battery Power Indicators of BT PTT button
Red blinking light
Light off
Red solid light
For best performance, keep charging PTT when not in use.
Low battery voltage
Fully charged. Over 24 hours'talk time
Less than a full charge
BT PTT button
USB charging cable
(One out of two)
1