Concourse SMART WHEELS Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Concourse SMART WHEELS. Concourse SMART WHEELS 11 pagina's. Remote pairing procedure
Ook voor Concourse SMART WHEELS: Gebruiksaanwijzing (16 pagina's), Gebruiksaanwijzing (20 pagina's), Montagehandleiding (12 pagina's), Snelstarthandleiding (3 pagina's)

Pagina afdrukken

Concourse SMART WHEELS Gebruiksaanwijzing

4.0

CONNECTING THE SMART WHEELS TO YOUR CBM3 BUGGY

As an owner of the Concourse CBM3 Push Buggy you will not need to fit different axles (as opposed to other push buggy models) .

The Smart Wheels will connect directly to the CBM3 axle, however, you do require locking pins to secure the central hub of the

Smart Wheels so the outer drives your buggy .

Before installing the CBM3 axle locking pins, please ensure you position your buggy in a safe and stable manner then remove the

two large free spinning wheels .

4.1 Enclosed you will find two locking pins and a 3mm allen key

as shown below .

4.2 You will notice a hole [also shown below] to thread the

locking pin screw through using the allen key .

4.4 The Smart Wheels are labelled Left and Right .

Left and Right of the buggy is determined by standing behind

the buggy holding the handle as you would during play.

Now pick up one wheel and guide it onto the Axle already

connected to your buggy . To avoid excess dirt clogging the

charging socket it is recomended to position the charging

socket at the highest point from the ground as you slide the

wheel into positon . Press the red button on the outside of the

wheel as you guide it onto the axle . Release the red button

when the wheel is in position .

PLEASE NOTE:

THE LOCKING PINS WILL SUIT EITHER SIDE OF THE BUGGY.

concoursegolf.com

4.3 Remove the original buggy wheels . Hold the locking pin,

then using the allen key thread the locking pin screw on

smoothly until it's secure and tight . Repeat this process with

the opposite side of the CBM3 buggy .

4.5 To ensure each Smart Wheels is securely locked in place you

may need to slightly rotate (up to ¼ turn) so the raised point

on outside of the axle neatly slots into the corresponding

indentation on the hub of the wheel .

This ensures the central hub of each Smart Wheel locks in place

and does not free-wheel .

Once both wheels are connected in the same manner they will

be able to drive the buggy .

LOCKED IN POSITION

User Instruction Manual | Version 6.0

5.0

CONNECTING THE SMART WHEELS TO OTHER MODELS

5.1 Position your buggy in a safe manner then remove the original

buggy wheels .

5.2 Locate the 2 small metal Smart Wheel Axles – Left and Right are

the same and fit on either side .

5.4 The Smart Wheels are labelled Left and Right .

Left and Right of the buggy is determined by standing behind

the buggy holding the handle as you would during play.

Now pick up one wheel and guide it onto the Axle already

connected to your buggy . To avoid excess dirt clogging the

charging socket it is recomended to position the charging

socket at the highest point from the ground as you slide the

wheel into positon . Press the red button on the outside of the

wheel as you guide it onto the axle . Release the red button

when the wheel is in position .

CAUTION:

• PLEASE ALWAYS ENSURE WHEN ATTACHING OR REMOVING WHEELS FROM YOUR BUGGY IT IS SECURELY

SUPPORTED/HELD-UP, TO AVOID RISK OF INJURY OR EQUIPMENT DAMAGE.

concoursegolf.com

5.3 Connect both Smart Wheels axles to your existing push buggy

where you removed the original buggy wheels (as indicated

below) .

Please ensure each firmly click into place, then pull on the axles

to test that they are secure .

5.5 To ensure each Smart Wheels is securely locked in place you