Anywhere Fireplace Tribeca II 90201 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anywhere Fireplace Tribeca II 90201. Anywhere Fireplace Tribeca II 90201 4 pagina's. Fireplace

ASSEMBLY INSTRUCTIONS

Step 1
Take fireplace frame (Part A) out of plastic bag and lay the
backside onto a carpet or towel with opening facing up.
Step 3
Attach the stand to the fireplace frame using the 4 .5" screws
(Part K) using the provided hex tool.
Step 5
Insert plastic washers (Part L) into the holes on the glass base
(Part I) and secure the glass base onto the stand using the thick
.75" screws (Part M) using the hex tool provided. Be sure not to
over tighten. Until screws are secured, glass may not be stable. Be
careful and insure that glass base does not fall before securing.
Step 2
Turn your fireplace upside-down onto its top and place the stand
(Part H) onto the fireplace. Make sure the flanges that stick out
line up with the 4 holes pre-drilled in the fireplace.
Step 4
Now place the black glass base (Part I) over the stand so that the
holes in the glass line up with the holes on the bottom of the
stand. Make sure the rubber feet on the glass base are facing you.
This will become the bottom of the fireplace.
Step 6
Turn your fireplace over onto the base so that it is now standing
right side up and place the burner (Part B) into the recessed hole
in your fireplace frame.