Duerkopp Adler 175' 176 Montagehandleiding - Pagina 8
Blader online of download pdf Montagehandleiding voor {categorie_naam} Duerkopp Adler 175' 176. Duerkopp Adler 175' 176 8 pagina's. Double-chainstitch machines
Pagina afdrukken
Anbauanleitung Elektropneumatische Mehrweite
Fitting Instructions Electropneumatic Fullness
Cylinder
Ausgabe/Edition:
Änderungsindex
01.2009
Rev. index: 00.0
für Teilesatz 0175 590044
Kit 0175 590044
16
–
Put the solenoid valve 16 with its gasket and fasten it with the two
cylinder head screws M2 x20H.
–
Prepare the hose 17 needed for the connection.
The short piece of hose (45 mm) for the cylinder. The longer one
(175 mm) should then be for the valve.
ATTENTION!
Pay attention to the flow direction of the throttle 15.
Valve
–
Connect the remote end of the hose to the cylinder and to the
valve.
–
Affix the connection hose to the existing hoses using the cable
ties 18 and 19.
20
21
–
Using a small screwdriver, remove carefully the key cap 20.
–
Remove the key button 21 and replace it against the new one
(fullness).
–
Put on the key cap 20 again.
Printed in Germany
Teile-Nr./ Part-No.:
0791 175702
17
Blatt:
8 von 8
Sheet: 8 from 8