Duerkopp Adler 271 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Duerkopp Adler 271. Duerkopp Adler 271 18 pagina's. Preface and general safety notes
Ook voor Duerkopp Adler 271: Montage-instructies (2 pagina's)

Pagina afdrukken

2. Machine Elements and their Functions

2.1 Elements on the Machine Head

Element

1Screw

2Hand lever

3Spooling device

4Control panel

5Oil reservoir

6Adjustment wheel

7Adjustment wheel

8Rest

9Needle thread tension

10Edge cutter

11Needle

12Locking button

13Hand lever

14Adjustment wheel

15Roller top feed

Function

–

Regulating of the pressure foot pressure. The

Setting of the screw is to be fixed.

–

Turning the edge cutter 10 on and off. The position

of the hand lever is variablly adjustable.

–

See under Section 3.2 Spooling of the Bobbin

Thread.

–

See the motor manufacturer's instructions.

–

The oil level should not be allowed to drop below

"MIN". When necessary fill with ESSO SP-NK10 oil

to "MAX".

–

Setting the stitch length for reverse sewing (with

sub-classes -....41 via hand lever).

–

Setting the stitch length for forwardsewing (with

sub-classes -....41 via hand lever).

–

For tilting the machine head to the back (not on

classes 273 and 274).

–

Turn in direction + = higher needle thread tension

Turn in direction - = looser needle thread tension

–

Function see following page.

–

System 134, 797 or Sy 1955-01

- Risk of Injury! -

Before replacing the needle it is essential to turn the main

switch off.

–

Lock the pressure foot in the raised position

–

Setting the carrier roller up. It is swung out of the

work area. Sewing only with bottom feed

–

Transport length for the top feed roller

–

Function see following page