Anywire B284SB-01-1KPLP30 Handmatig - Pagina 4
Blader online of download pdf Handmatig voor {categorie_naam} Anywire B284SB-01-1KPLP30. Anywire B284SB-01-1KPLP30 16 pagina's.
Pagina afdrukken■Example of mixed installation with 2-wire (non-isolated) and
4-wire (isolated) terminals
Red:
Red: DP
DP
AnyWireASLINK
master
Black:
Black: DN
DN
ASLINK
General-purpose
filter
power supply filter
Red: DP
24V DC*
Black: DN
Red: DP
Black: DN
Red: DP
Black: DN
Red: DP
Black: DN
Green: 24V
White: 0V
Dedicated flat cable
1.25mm
(4-wire)
2
4P link connector is
convenient for
branching.
The sum of the
portions of DP, DN is
the total line length.
Black: DN
Red: DP
24V DC*
AnyWireASLINK terminator
One terminator should be connected to the DP, DN
terminal farthest from the AnyWireASLINK master unit.
Connect it correctly so as not to set the wrong polarity.
To connect loads (e.g. I/O ports) that are
！
CAUTION
controlled with a power supply other than
the one used for the AnyWireASLINK
system, always use a 4-wire (isolated) terminal.
Otherwise, malfunction may be caused.
2 points
2 points
8 points
Red: DP
Black: DN
1 point
1 point
4 points
Red: DP
Black: DN
16 points
8 points
Black: DN
The branching
2 points
has no limitation.
Red: DP
2 points
Red: DP
-B284SB0*1K**P30 4/16-
[Notes on Combined Use of 4-Wire (Isolated) Terminal]
If the total length of the sections where all the DP, DN, 24V, and 0V lines run in
parallel in the power supply system is more than 50m, connect an ASLINK filter
(Type ANF-01) or a filter manufactured by COSEL Co., Ltd. (Type EAC-06-472) in
series to the 24V and 0V lines at a position where these four lines start running in
parallel.
This will improve noise resistance, suppress the adverse effects of crosstalk caused
by transmitted signals, and stabilize signals.
The above filters must be inserted regardless of whether power is supplied to all
terminals collectively from the power supply for the master or power is supplied to
each terminal individually from their local power supply.
Insert the "ASLINK filter [Type ANF-01]" regardless of installation
method and distance when complying with CE Standard.
■Filter allowable current
Product
ASLINK filter
Filter of COSEL Co., Ltd. EAC-06-472 MAX 6A/24V DC
■AnyWire Type: ANF-01 Connection example
① Power supply to the entire system
AnyWireASLINK master
General-purpose power
supply filter
(Use it if necessary.)
24V DC stabilized
power supply
If the total length of the section
where all the DP, DN, 24V, and 0V
lines run in parallel is more than 50m
Black: DN
2 points
Type
Allowable power current
ANF-01
MAX 5A/24V DC
DP
DN
24V
0V
LG
POWER IN
PE
ANF-01
0V
24V
SLAVE
L N FG
〜
〜
〜
0V
24V
0V
24V
2-wire
DP
terminal
DN
DP
4-wire
DN
24V
terminal
0V
Terminator