3onedata NP5100-2T-32DI Snelle installatiehandleiding - Pagina 4
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} 3onedata NP5100-2T-32DI. 3onedata NP5100-2T-32DI 4 pagina's.
Pagina afdrukken
LED
Indicate
Description
Port has established valid
ON
network connection
Port is in a network
Link(1-2
Blinking
communication status
Port hasn't established valid
OFF
network connection.
Serial port is not transmitting
OFF
data or transmitting data
TX(1-32)
abnormally
Blinking
Serial port is transmitting data.
Serial port is not receiving data
OFF
RX(1-32)
or receiving data abnormally
Blinking
Serial port is receiving data.
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment (The network
segment of Network Port 1 is 1, and the network
segment of network port 2 is 8), and the network
between them can be mutually accessed.
Step 2
Enter device's IP address in the address bar of the
computer browser.
Network Port 1:
Network Port 2：
Step 3
Enter device's username and password in the login
window as shown below.
Step 4
Click "Login" button to login to the WEB interface of
the device.
Note:
The default IP address of the device Network port 1 is
"192.168.1.254", the default IP address of the network
port 2 is "192.168.8.254".
The default user name and password of the device are
"admin".
If the username or password is lost, user can restore it to
factory settings via management software; all modified
configurations will be cleared after restoring to factory
settings, so please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
100M copper port
10/100Base-T(X) self-adapting
RJ45
port,
self-adaption or forced working
mode, support MDI/ MDI-X
self-adaption
Serial Port
3IN1 serial port, adopts RJ45,
supports 15KV ESD protection
Console port
Indicator
OLED display
Power supply
Input power supply
Access terminal block
Power consumption
No-load
Full-load
Working Environment
Working temperature
Storage temperature
Working humidity
Protection grade
half/full
duplex
CLI command management
port (RS-232), RJ45
Power indicator, running status
indicator,
copper
port
connection
status
indicator,
serial port receiving indicator,
serial
port
transmission
indicator
Menu/Exit,
page
up,
page
down, select/confirm
85~265VAC
Support single-phase socket
with rocker switch
5.6W@220VAC
13.2W@220VAC
-40～75℃
-40～85℃
5%～95% (no condensation)
IP40 (metal shell)