Danby DDW1802 - 14352 Servicehandleiding - Pagina 12

Blader online of download pdf Servicehandleiding voor {categorie_naam} Danby DDW1802 - 14352. Danby DDW1802 - 14352 12 pagina's. Dishwasher division 22 461

Poor drying of dishes
olmproper loading of dishes, pots
and other.
.Heating element (open).
olncoming water temperature too
low,
rWiring or terminal (broken or
burnt).
lnstruct
customer/usr
on
proper loading per owner' s
guide.
Replace heating element.
lncoming water temperature of
140"F for best drying results.
Replace or repair.
Detergent cup will not
open.
oCup binding
oRoll pin retainer or shaft broken.
oDefective bi-metal.
rTimer contact (ooen or broken).
Repair or replace.
Replace pin, retainer or shaft.
Repair or replace.
Reolace timer.
Door will not lath.
Door latch damaqed.
Replace door latch.
Rinse agent liguid will not
eject.
.Electromagnetic valve defective.
rRinse agent dispenser not
mounted correctly.
.Plunger stuck or held in closed
oosition^
Replace valve.
Mount securely to rear of inner
door panel.
Free plunger or adjust plunger
release.
Rinse agent liquid leaks.
ocontainer cracker or broken.
oDefective seal on plunger.
oOver filling container.
Replace GonEilner.
Replace plunger.
Follow instructions in owner's
manual.
Noisy pump assembly.
.lmpellers not properly shimmed
or rubbing.
oPump
perts
not
properly
installed.
rDebris in bottom of tub sump
area.
oDefective motor bearinqs.
Use shim gauge furnished in
impeller and seal kit, when
seals are properly shimmed the
impellers will be in correct
operating position.
Inspect and correct.
Clean out sump area.
Replace motor.
Dishwasher continues to
fill or continues to till
even though in case of
there is no voltage to fill
valve.
oSomething (dart or
foreign
material) under diaphragm in
water inlet valve.
rDefective water inlet fill valve.
Clean water inlet valve or
replace.
Replace water inlet valve.
Detergent
left
in
dispenser.
oDetergent cup held or blocked
by large dishes.
.Disp€nser wet when detergent
was added.
On proper loading dishes.
Instructs customer/user.
Softener leaking
oSoftener broken.
oSoftener nut loosen.
Faeplace sonener.
Screw down softener cao.
Leaking form air inlet.
.Air inlet nut loose.
oAir inlet install uo side down.
Screw down air inlet nut.
Reinstall air inlet orooerlv.