Duerkopp Adler 550-16-26 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Duerkopp Adler 550-16-26. Duerkopp Adler 550-16-26 19 pagina's. Sewing lamp led
Ook voor Duerkopp Adler 550-16-26: Montage-instructies (2 pagina's), Gebruiksaanwijzing (12 pagina's)
Pagina afdrukken
1.
Product Description
2.
Proper Use
The Dürkopp Adler 550-16-26 is a configured sewing station for the
sewing-on of sleeves.
The workstations are equipped with a single needle, double lockstitch,
post-bed machine with bottom and top belt feed.
30 different fullness values can be selected via the keypad. In order to
achieve a firmer pulling-on of the stitch, a supplementary tension can
be added when a high fullness value is turned on.
Further details:
Step motor technology for top and bottom belt feed.
Material-protective belt feed with two individually powered belts for
the top and bottom feed.
The 550-16 is a sewing place which can properly be used for sewing
litght to medium weight material. Such material is, as a rule, material
made up of textile fibres. This material is used in the garment industry.
Further, it may be possible to also conduct so-called technical seams
with this special sewing machine. Here, however, it is essential that the
operator (Dürkopp Adler AG would be pleased to collaborate) make
an evaluation of the possible dangers because such applications are,
on the one hand, comparatively rare and, on the other, the variety is
immense. Dependent of the result of this evaluation, appropriate safety
measures are to be taken.
Generally, only dry material should be sewn on this machine. The
material should not exceed the thickness of 7 mm when compressed
by the lowered sewing foot. The material should not contain any hard
objects, otherwise it would be necessary to protect the eyes during the
sewing process. For the time being, no such guard is available.
The seams are produced generally with threads of textile fibres of a
dimension up to 70/3 - 140/3 NeB. Before using any other threads it is
necessary, also in this case, to estimate the consequential dangers
and to take, if necessary, the respective safety measures.
This special sewing machine may only be installed and operated in a
dry and clean environment. If the sewing machine is used in another
environment which is not dry and clean, further measures, which are to
be agreed upon, may be necessary (see EN 60204-31:1999).
We, as a manufacturer of industrial sewing machines, assume that at
least semi-skilled operating personnel will be working on our products
so that all normal operations and, where applicable, their dangers are
presumed to be known.
1
5