Duerkopp Adler 577-1111 Handleiding voor installatie-instructies - Pagina 12

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Duerkopp Adler 577-1111. Duerkopp Adler 577-1111 19 pagina's.

Pagina afdrukken

Duerkopp Adler 577-1111 Handleiding voor installatie-instructies

5.6

Placing and tensioning the V-belt

–

Remove the handwheel and the housing cover from the machine

head.

–

Remove the skip guard 1.

–

Place the V-belt 2 onto its pulley 3 and pass it down through the

cutout in the table top.

–

Install again the skip guard 1.

–

Remove the V-belt covering from the sewing drive.

–

Loosen the motor fastening nuts 4 and place the V-belt 2 onto its

pulley 5 on the sewing drive.

–

By swinging the entire sewing motor, adjust the tension of the

V-belt so that it can be lowered in its middle about 10 mm when

exerting a slight pressure.

–

Tighten the nuts 4.

–

Fit the V-belt covering on the sewing motor as well as the housing

cover and the handwheel on the machine head.