Anzzi SH-AZ101 Series Installatie- en bedieningshandleiding - Pagina 9
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Anzzi SH-AZ101 Series. Anzzi SH-AZ101 Series 14 pagina's. Rainfall shower bar
Ook voor Anzzi SH-AZ101 Series: Installatie- en bedieningshandleiding (12 pagina's)
Pagina afdrukkenINSTALLATION
7
a.
anchor
b.
8
rod
[11]
[09]
nut
filter
a.
[11]
screw
cap
c.
b.
[01]
STEP 7:
a. Drill the holes for the Mounting Kit [11]
using a 1/4" (6 mm) bit.
b. Install the anchors.
c. Secure the Mounting Kit [11] with
screws.
d. Make sure the screw holes are aligned
vertically.
e. Slide the cap to the Mounting Kit [11].
STEP 8:
a. Install the Faucet [01]
Riser [09]. Push the rod into the hole of
the Mounting Kit [11]. Hand tighten the
nuts and secure with wrench.
Do not over tighten.
Note:
Put a thin cloth between the nut
and the wrench to avoid scratching.
b. Make sure the Riser [09] is vertical.
c. Secure the rod of Riser [09] by tighten
the screws.
filters and
PG. 5