2connect CTSSU008.2 Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 2connect CTSSU008.2. 2connect CTSSU008.2 4 pagina's. Steering wheel control interface for subaru vehicles

Pagina afdrukken

INSTALLATION GUIDE

When all the above wires (and any additional accessories) have been connected, finally make the power connections

between the stereo and the vehicles pre-existing connector.

Test stereo and steering wheel control functionality for correct operation before reassembling the

vehicle dashboard. If steering wheel control functions are unresponsive, please uninstall the interface and

wiring and reinstall carefully in accordance with the above steps.

For further help, please contact and fill out a support ticket with the full details of your issue at:

IMPORTANT: THIS STEP MUST BE COMPLETED BEFORE CONNECTING POWER TO THE INTERFACE.

FAILURE TO DO SO MAY RESULT IN A LACK OF FUNCTIONALITY AND THE NEED TO REINSTALL THE

PRODUCT

USB & AUX Retention

Replacement Circuit Board

support.connects2.com/tickets/technical

Need help? Visit support.connects2.com/tickets/technical

In order to retain the factory location

of the USB and AUX. You would be

required to remove the factory circuit

board from the housing, replacing it with

the circuit board provided provided as

illustrated by the images on the left.

Please note: It is important to ensure

that the housing of the original USB &

AUX is identical to the one shown.

CTSSU008.2