Duerkopp Adler 176 Accessoires Handleiding - Pagina 10
Blader online of download pdf Accessoires Handleiding voor {categorie_naam} Duerkopp Adler 176. Duerkopp Adler 176 12 pagina's. Fitting instructions tape feeder kit 0176 590034
Ook voor Duerkopp Adler 176: Accessoires Handleiding (8 pagina's), Accessoire-handleiding (8 pagina's)
Pagina afdrukken
3.4 Setting the adjustment ring of the reinforcement tape roller support
4
3
3.5 Setting the brake for the reinforcement tape
Ausgabe/Edition:
Änderungsindex
01.2009
Rev. index: 00.0
Anbauanleitung Bandzuführung
für Teilesatz 0176 590034
Fitting Instructions Tape Feeder
Kit 0176 590034
2
1
The reinforcement tape roller 5 should be aligned centred to the
reinforcement tape guide and the needle.
–
Remove the brake cone 3 from the rod 2.
–
Shift the roller 5 on the rod 2.
–
Shift the brake cone 3 on the rod.
–
Align the roller 5 to be centred to the guide 6.
–
Fasten the cone 1 on the right.
–
Shift the brske cone 3 on the left against the roll and fasten it.
The reinforcement tape roller should no longer be in motion after the
ending of the sewing process.
At the same time the reinforcement tape roller should not brake
intensely, otherwise a warp on the sewing material may occur.
–
Set the brake 4 on the left brake cone 3 accordingly.
6
Printed in Germany
Teile-Nr./ Part-No.:
0791 176701
5
Blatt:
10 von 12
Sheet: 10 from 12