Anzzi MILAN 1344319 Installatie- en bedieningshandleiding - Pagina 11
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Anzzi MILAN 1344319. Anzzi MILAN 1344319 12 pagina's. Air jetted freestanding bathtub with chroma-lights
Pagina afdrukkenOPERATING GUIDE
BUBBLE MASSAGE
ON / OFF BUTTON
POWER THE BATHTUB
To turn on the system, press the power button, and the indicator light will come on.
Then press either the "Light" Button or "Air Pump" button to turn on the desired Function,
press again to turn off the function. (While the functions are active, the button will have
a red back light, when powered off it will have a white back light).
If no button is pressed for 10 seconds the control buttons will lock, and the "Power"
110-240V
button will begin to flash. To unlock, press and hold the power button for 2 seconds,
until the button stops flashing. You can now activate the other buttons as desired.
Please note, the system will automatically power itself off after 60 minutes.
Press the "Power" button. If system is locked press and hold the "Power" button for 2
seconds, then press the power button again to turn off the system.
CHROMA-LIGHT
Push once to turn on. The lights will activate on a static color. Each subsequent push
of the bottom will manually cycle through all colors allowing you to find and stay on
110-240V
your preferred color.
Press and hold for 2 seconds and the lights will automatically begin cycling through all
available colors.
Press and hold for 2 seconds again to turn off the lights completely.
AIR BUBBLE MASSAGE SYSTEM
The Air pump should be used when the tub is filled. The Air pump will power off after
5 minutes if there is no water in the tub.
Have questions? Call us at
110-240V
CHROMA-LIGHT
ON / OFF BUTTON
(AC110-240V/300W-400W)
LEVELER
RULER
1-844-44-ANZZI
BATHTUB POWER
ON / OFF BUTTON
ADJUSTABLE
WRENCH
or visit us at
www.ANZZI.com
TEFLON
FLEXIBLE
TAPE
DRAIN
included
11