Duevi SINT-13 Installatie- en gebruikshandleiding - Pagina 8
Blader online of download pdf Installatie- en gebruikshandleiding voor {categorie_naam} Duevi SINT-13. Duevi SINT-13 8 pagina's. Wireless voice synthesis receiver with activation
Pagina afdrukken
WORKING
WARNING
SINT-13 must be activated via remote control/user (command or arming button) in order to play voice
messages from sensors and control panel/TSR.
SINT-13 can be "disabled" via remote control/user (command or disarming button) in order to stop
the play of voice messages.
SINT-13 plays the voice message combined to the device which transmitted its radio code.
Each time a radio code is received the LD3 blue LED blinks.
Radio activator (buttons)
TXS
Red
Green
* To use the DVTR-RT keyboard it is mandatory to disable its SUPERVISION
VOLUME ADJUSTMENT
When in normal working (JP1 opened), it is possible to adjust the volume just pressing the P1 and P2 buttons
as many times as the increase/decrease desired (8 steps):
P1 decrease the volume: LD1 switch on showing volume decreasing
P2 increase the volume: LD4 switch on showing volume decreasing
After each volume change is played the Voice Message 1 as test.
8
TXS-M
DVTR-RT*
Big
Small
Activates SINT-13 and play the Voice Message 1.
The LD2 yellow LED switches on
While active, the SINT-13 play the voice message combined to
the detector radio code received.
Deactivates SINT-13 and play the Voice Message 2.
The LD2 yellow LED switches off
While deactivated, the SINT-13 does not play any voice
message.
Function