Duevi EzyDriveCAM Hardware installatiehandleiding - Pagina 5

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Duevi EzyDriveCAM. Duevi EzyDriveCAM 14 pagina's.

Pagina afdrukken
Data communication from/to the camera is made through power line by HomePlug

Activity LED

Data transfer
Link LED
Connection to
HomPlug system
Input/Output
Use provided cable
TO PREVENT THE RISK OF ELECTRIC SHOCK, OPEN THE DEVICE COVER ONLY
TO PREVENT
TO PREVENT
TO PREVENT
WHEN THE 110 V V V V / 230
WHEN THE 110
WHEN THE 110
WHEN THE 110
POWER and DATA
The camera is powered directly by 230 V
Use ONLY this one
in case of single SD
Figura 3 – Electronic board of EzyMegaCAM
THE RISK OF ELECTRIC SHOCK, OPEN THE DEVICE COVER ONLY
THE RISK OF ELECTRIC SHOCK, OPEN THE DEVICE COVER ONLY
THE RISK OF ELECTRIC SHOCK, OPEN THE DEVICE COVER ONLY
/ 230 V V V V POWER SUPPLY IS SWITCHED OFF
POWER SUPPLY IS SWITCHED OFF. . . .
/ 230
/ 230
POWER SUPPLY IS SWITCHED OFF
POWER SUPPLY IS SWITCHED OFF
GND
MASTER slot
Lower slot
card
PL
5
power line
®
1.0 system
230 V
Double SD slot
only with device
SLAVE slot
Upper slot
DO NOT use in case
of single SD card
(connector side)
BAT
Backup battery
connector
230 V
AC
N = Neutral (blue)
F = Phase (brown)
To install up to
two SD cards
(must be
identical).
Insert/remove
completely
unpowered