Cascade 90FX Installatie-instructie - Pagina 2

Blader online of download pdf Installatie-instructie voor {categorie_naam} Cascade 90FX. Cascade 90FX 14 pagina's. Swing frame paper roll clamp

ONTENTS

Recommended Hydraulic Supply

Truck Requirements

Installation

Periodic Maintenance

ECOMMENDED HYDRAULIC SUPPLY

The FX-Series Swing Frame Paper Roll Clamp requires two

(2) hydraulic circuits over the mast to provide three (3)

functions CLAMP, ROTATE and SWING on the Attachment.

No solenoid adaption is required. Recommended hydraulic

supply arrangement is A and B, or C. Refer to Cascade

Hose and Cable Reel Selection Guide , Part No. 212199, to

select the correct hose reel for the mast and truck. Hose

and fitting requirements are:

• No. 8 with .400 in. (10 mm) minimum I.D. for both CLAMP

and ROTATE/SWING functions.

This Manual provides instructions for installing the Cascade

90FX-Series Paper Roll Clamp on lift trucks.

Follow the suggested installation procedures for best

results. If you have any questions or need more information,

contact your nearest Cascade Service Department

(see back cover).

Read the WARNING Statements placed throughout this

Manual to emphasize safety during installation.

IMPORTANT: Field alterations may impair performance or

capability and could result in loss of warranty. Consult

Cascade for any required modifications.

A and B

RH and LH THINLINE

Mast Double Internal Hose Reeving Group.

OR (optional)

A or B and C

LH or RH THINLINE™ 2-Port Hose Reel Group and

Mast Single Internal Hose Reeving Group.

GA0033.ill

™

2-Port Hose Reel Groups.

6028021 Rev. 1