3onedata MODEL7302 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3onedata MODEL7302. 3onedata MODEL7302 10 pagina's. Fe1 optic fiber modem
Pagina afdrukken RACK/AC AC redundancy power supply panel：
160~270 VAC：AC 220V input jack
ON OFF：power switch
+5V：5V main power supply indicator lamp；
+12V：12V fan power supply indicator lamp
RACK/DC DC redundancy power supply panel：
40~60 VDC：DC-48V input connector (FG grounded, with"- +" terminals connected with
48V input)
ON OFF： power switch
+5V： 5V main power supply indicator lamp
+12V： 12V fan power supply indicator lamp
5. MODEL7302 Application
5.1 E1 configuration
The device support two physical match impedance of the E1 interface, which can
automatics 120ohm balanced twisted-pair and 75ohm non-balanced coaxial cable interface.
Users can select the appropriate interface to connection dispense with any operation.
5.2 Connection the Twisted Pair(120 ohm) to the G.703 Network
As shown, 1 and 2 are sending lines, 4 and 5 are receiving lines.
Line Sequence of Balanced Twisted-Pair at E1 Interface RJ45
Attention: In E1 twisted-pair standard, 1 and 2 are defined as sending lines, 4 and 5 as
receiving lines.
RACK/AC AC Redundancy Power Supply Panel
RACK/DC DC Redundancy Power Supply Panel
1. TX+ Positive end of data transmission
2. TX- Negative end of data transmission
1
3. Idel
2
3
4. RX+ Positive end of data reception
4
5
5. RX- Negative end of data reception
6
7
6. Idel
8
7. Idel
8. Idel
Page 7 of 10
MODEL7302 User Manual