cascade corporation 55K Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} cascade corporation 55K. cascade corporation 55K 18 pagina's. Integral fork positioner/ sideshifter
Ook voor cascade corporation 55K: Installatie-instructies (4 pagina's)

Pagina afdrukken

NTRODUCTION

This manual is for the Cascade K-Series Integral Fork

Positioner & Sideshifter. Contents include an Operator's

Guide, Installation Instructions, Periodic Maintenance and

Recommended Spare Parts.

IMPORTANT: K-Series Integral Fork Positioner &

Sideshifter is metric. Supply fittings adapted as required

for application.

NOTE: All specifications are shown in Metric units where

applicable. All fasteners have a torque value range of

±10% of stated value.

Special Definitions

The statements shown appear throughout this Manual

where special emphasis is required. Read all WARNINGS

and CAUTIONS before proceeding with any work.

Statements labeled IMPORTANT and NOTE are provided

as additional information of special significance or to make

the job easier.

WARNING – A statement preceded by

WARNING is information that should be

acted upon to prevent bodily injury. A

WARNING is always inside a ruled box.

CAUTION – A statement preceded by CAUTION is

information that should be acted upon to prevent

machine damage.

IMPORTANT – A statement preceded by IMPORTANT is

information that possesses special significance.

NOTE – A statement preceded by NOTE is information that

is handy to know and may make the job easier.

PERATION

This section contains operating instructions for the

Cascade K-Series Integral Fork Positioner & Sideshifter.

It will help you avoid common errors which often cause

damage to the equipment or product being handled.

This information is intended to simplify operator

understanding about effective and safe Fork Positioner

& Sideshifter use and operation. Read this information

thoroughly before operating the attachment. Be sure you

know and understand all operating procedures and safety

precautions. If you have any questions or don't understand

a procedure, ask your supervisor.

Emphasize Safety! Most accidents are caused by

operator carelessness or misjudgment. You must

watch for poorly maintained equipment and

hazardous situations and correct them.

6077298-R7 EN

Weighted Emission Sound Pressure Level - Weighted

emission sound pressure level (LpA) does not exceed

70 dB(A).

Measured Value of Whole Body Vibration - Measured

value of whole body vibration (m/s 2 ) does not exceed

0,5 m/s 2 .

Measured Value of Hand-Arm Vibration - Measured value

of hand-arm vibration (m/s 2 ) does not exceed 2,5 m/s 2 .

WARNING: Rated capacity of the truck/

attachment combination is a responsibility

of the original truck manufacturer and may

be less than shown on the attachment

nameplate. Consult the truck nameplate.

WARNING: Do not operate this attachment

unless you are a trained and authorized lift

truck driver.

WARNING: For forks longer than 1500 mm

or load centers exceeding 760 mm, consult

Cascade.

Backrest

Sideshifter

Fork

Positioner

FP0863.eps

Integral

Carriage

Forks