Cascade Health and Fitness FLUIDPro Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cascade Health and Fitness FLUIDPro. Cascade Health and Fitness FLUIDPro 8 pagina's. Cascade health and fitness fluidpro fitness bike with wireless power meter

Pagina afdrukken

with Wireless Power Meter

Thank you for purchasing the CASCADE FLUIDPro trainer and wireless power meter.

Please read the following directions thoroughly before use.

Model:

37320 CASCADE FLUIDPro trainer with wireless power meter

Contents:

1 pc trainer, 1 pc riser block, 1 pc quick release skewer and

1 pc wireless power meter.

CAUTION

1. Please read and follow all instructions before using the trainer.

2. This trainer is intended for single-rider bicycles only.

3. Before riding make sure that both legs of the trainer are fully extended away from the frame assembly.

4. Before riding, be sure the bicycle is correctly installed and securely locked into the trainer as explained in the

instructions.

5. Do not touch the resistance unit during use and for a period of time after use until it has had sufficient time

to cool down. The resistance unit can become hot enough to cause burns.

6. Keep children, pets and all items safely away from the trainer during use.

7. Always use the trainer on a flat surface.

8. Always consult a doctor before beginning any exercise routine or using any exercise or fitness product.

Should you become ill, feel dizzy, light-headed or nauseous while riding the trainer, stop riding immediately and

seek medical attention.

WARNING

Read and follow all instructions concerning installation

of the bicycle on the trainer.

the bicycle to the trainer could result in serious injury

to the rider or those near the trainer.

BIKE MOUNTING INSTRUCTIONS

1. Replace the bicycle's rear wheel quick release (QR) skewer with the one provided. See the bicycle owner's

manual for instructions on how to properly adjust the QR skewer. Make sure the QR skewer is tight and your

wheel is aligned properly on the bicycle.

2. Rotate both the Release Clamp and Adjustment Knob (with the associated locking rings) counterclockwise,

moving them away from the center of the trainer. The release clamp should remain in the locked position as

shown in the Figure 1.

Failure to securely attach

17280 Woodinville-Redmond RD NE

Suite 800

Woodinville WA 98072

425.402.4062

cascadehealthandfitness.com