AOC A42HD84 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AOC A42HD84. AOC A42HD84 18 pagina's. 42" large screen flat panel plasma display

Pagina afdrukken

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions.

Do not operate this apparatus near water.

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

Do not block any of the ventilation openings.

Clean only with a dry cloth.

Do not defeat the safety purpose of the polarized or grounding-type

plug. .A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and third grounding prong. The

wide blade or third prong are provided for your safety. When the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet..

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with a cart, stand, tripod, bracket, or table

manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

10.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

11. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

12. This product may contain lead and mercury. Disposal of these

materials may be regulated due to environmental considerations. For

disposal or recycling information, please contact your local authorities

or the Electronic Industries Alliance: www.eiae.org

13. Damage Requiring Service -The appliance should be serviced by

qualified service personnel when:

•

The power supply cord or the plug has been damaged; or

•

Objects have fallen, or liquid has been spilled into the appliance;

•

The appliance has been exposed to rain; or

•

The appliance does not appear to operate normally or exhibits a

marked change in performance; or

•

The appliance has been dropped, or the enclosure damaged.

Note to the CATV system installer: This

reminder is provided to call the CATV

system installer's attention to Article 820-40

of the NEC that provides guidelines for

proper

grounding

specifies that the cable ground shall be

connected to the grounding system of the

building, as close to the point of cable entry

as practical.

Read before operating equipment

specified by the

and,

particular,

14. Tilt/Stability- All televisions must comply with recommended

international safety standards for tilt and stability properties of its

cabinet design.

•

Do not compromise these design standards by applying

excessive pull force to the front, or top, of the cabinet which

could ultimately overturn the product.

•

Do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could

unsuspectingly fall from the top of the set and cause product

damage and/or personal injury.

15. Wall or Ceiling Mounting- The appliance should be mounted to a wall

or ceiling only as recommended by the manufacturer.

16. Power Lines- An outdoor antenna should be located away from power

lines.

17. Outdoor Antenna Grounding- If an outside antenna is connected to

the receiver, make sure the antenna system is grounded so as to

provide protection against voltage surges and built up of static

charges.

Section 810 of the National Electric Code, ANSI/NFPA No.70-1984,

provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding connectors, location of

antenna-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. See Figure below.

18. Object and Liquid Entry- Care should be taken so that objects do not

fall and liquids are not spilled into the enclosure through openings.

19. Battery Usage CAUTION –To prevent battery leakage that may result

in bodily injury, property damage, or damage to the unit:

•

Install all batteries correctly, with + and - aligned as marked on

the unit.

•

Do not mix batteries (old and new or carbon and alkaline, etc.).

•

Remove batteries when the unit is not used for a long time.

20. Keep this manual for future reference

Example of Antenna Grounding as per

NEC - National Electric Code

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)