DANE-ELEC So Ready SuperSpeed Snelstarthandleiding - Pagina 5
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} DANE-ELEC So Ready SuperSpeed. DANE-ELEC So Ready SuperSpeed 6 pagina's. External usb 3.0 desktop hard drive
Ook voor DANE-ELEC So Ready SuperSpeed: Gegevensblad (1 pagina's), Gegevensblad (1 pagina's)
Pagina afdrukken
USB connections:
Turn On
1
Turn on your computer and wait for
start-up to complete.
Connect
2
• Connect the USB connector to the
So Ready SuperSpeed hard disk drive and
your computer.
• Connect the A/C power adapter to wall outlet
and your So Ready hard disk drive.
3
Install
Follow any on-screen instructions to complete the
hardware installation of your new hard disk drive.
Note: This USB 3.0 device can be plugged into a
USB 2.0 host provided you use the USB 3.0 Cable
supplied, however, the USB 3.0 device will only
obtain USB 2.0 speed while connected to a USB
2.0 host. Once USB 3.0 device is plugged back
into a USB 3.0 host your speeds will return to
SuperSpeed USB ranges. (Remember perfor-
mance may vary based on operating system or
environment)
So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE