Cascadia 2485716 Montage- en installatiehandleiding
Blader online of download pdf Montage- en installatiehandleiding voor {categorie_naam} Cascadia 2485716. Cascadia 2485716 6 pagina's. Bronze hardwired led outdoor motion-activated flood light with timer
ASSEMBLY AND INSTALLATION
T0460
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
AA
Mounting Screw
X2
BB
Cross Bar
X1
Important to Know:
1. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
2. This fixture requires a 110~120 VAC, 60 Hz power
source.
3. For general safety and to avoid any possible
damage to the sensor, be sure the power is
switched "off" before adjustment.
Maximum Wattage: 33 W
Working Temperature Range: - 4°F~113°F
Important to know
1. For general safety and to avoid any possible damage to the sensor, be sure the power is switched "off" before
adjustment.
2. Motion sensor: turns light ON automatically when motion is detected and turns light OFF automatically when motion
stops.
3. Photocell keeps the light OFF during daylight hours.
4. When in manual override mode, use wall switch to keep the light ON during the night
Note: Fixture can be wall mounted or eave mounted.
Wall Mounted
Light fixture and sensor should be mounted as shown above when installed (depending upon type of installation).
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
CC
DD
Decorative cover
X1
Fixture Mounting Screw
X1
Features:
1. Energy saving LED fixture.
2. Motion sensor: turns light ON automatically when
motion is detected and turns light OFF automatically
when motion stops.
3. Photocell keeps the light OFF during daylight hours.
4. When in manual override mode, use wall switch
to keep the light ON during the night.
Eave Mounted
EE
Wire Connector
X3
FF
Mounting Bracket Screw
X2
Page 1 of 6