Airvolution Esatto ESL60D2S Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Airvolution Esatto ESL60D2S. Airvolution Esatto ESL60D2S 19 pagina's. Slide-out rangehood 60 cm
Pagina afdrukkenTop-mounting in a cabinet
• Determine where in the top cabinet you want to install the rangehood, then drill 4 holes of Ø4mm at
the bottom of the hanging board of your cabinet (Fig. ).
• Install the rangehood onto the bottom of the cupboard and secure it in place with four ST4x30mm
screws (Fig ).
• If there is a space between the wall and the rear of the rangehood, install the rear-underside support
mounting bracket (Part ID 2, Installation kit) using the two ST4x8mm screws.
WARNING: Failure to install the screws or fi xing device in accordance with these instructions may
result in electrical hazards!
450mm
Fig.
30.5mm
215mm
Fig.