Airwalk EdgePoint PRO Installatiehandleiding - Pagina 16
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Airwalk EdgePoint PRO. Airwalk EdgePoint PRO 19 pagina's.
Ook voor Airwalk EdgePoint PRO: Referentiehandleiding (15 pagina's)
Pagina afdrukkenEdgePoint PRO Installation Guide
______________________________________________________________________________
Figure 6 – Position Power Supply, Cables, and Antennas
5.5
Secure eFemto to Bracket and Connect Cables
Follow the steps below to secure the eFemto cables:
1.
Position the device onto the mounting bracket in line with 4 pegs. Lock the device
securely into the keyholes by sliding the device down.
2.
Secure the cables from the cable guides on the mounting bracket and plug into the
device
Connect RF antenna
Connect GPS antenna
Connect power
Connect Ethernet
3.
Secure 2 lock bracket screws to top on either side to mount device to bracket
**Note: The USB port will remain vacant
AirWalk Proprietary and Confidential
Draw cables
through the
cable guides
Roll excess
cable slack
Insert power
supply at the top
of the bracket
Page 16 of 19