Dulas VC150SDD Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dulas VC150SDD. Dulas VC150SDD 18 pagina's.
7. Refrigerator Installation
DO NOT
position the refrigerator in direct sunlight or next to any heat sources. Make sure the
refrigerator is positioned to provide good ventilation and ease of access for maintenance.
Ventilation is particularly important for the condensers and compressors.
1)
Position the refrigerator on a level surface; wipe all
internal and external surfaces with a clean cloth.
2)
Check the PV isolator at the back of the cabinet is in
the "0" position.
3)
Check the freezer switch on the back left of the
cabinet is in the "0" position
4)
Plug the solar connectors into the refrigerator. Check
that there is sufficient slack in the cable to allow
access to the back of the refrigerator.
5)
Turn the PV isolator on by switching it to "1". Within 1
minute the compressor will start if there is sufficient
sunlight (solar irradiance of >125W/m²). You will be
able to hear the compressor operating and feel the
condensers getting warm.
10)
Roll the refrigerator into its final position and apply the brakes on the castors to secure it.
6)
Turn the freezer switch to "1". Within 1 minute
the second compressor will start if there is sufficient
sunlight (solar irradiance of >250W/m²). You will be
able to hear the compressor operating and feel the
condensers getting warm.
7)
Check
that
the
temperature display on the front of the cabinet is
operating. If there is insufficient natural light shine a
torch on the display for a few seconds.
8)
Ensure that all baskets are in position and the
refrigerator lid is firmly closed.
9)
Check that all cables are securely supported so
that they will not be pulled loose if the refrigerator is
moved for cleaning.
VC150SDD User's Manual
refrigerator
compartment
Page 11 of 18