Dulce systems PRO DQ Installatie- en gebruikershandleiding - Pagina 9
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Dulce systems PRO DQ. Dulce systems PRO DQ 20 pagina's. Generation 2
Pagina afdrukken4.2.5. Windows PC Connection
Green
Tab on
Bottom.
4.3.
ExpressCard Adapter (laptop)
The ExpressCard Adapter is for installation in a laptop equipped with an available
ExpressCard 34 slot. ExpressCards are rated at PCI-e x1 speed (250MB/sec).
Turn off the laptop and PRO DQ, insert the ExpressCard and connect the x1
cable. No switch setting adjustments are required when using the Uplink Port x1.
Uplink
Port x1
PRO DQ
Installation and User's Manual
g2
Typical Windows PC
Uplink
Port x8
Green
Tab to
left.
PRO DQ
Installation and User's Manual
g2
4.4.
Driver Installation
4.4.1. Mac Pro – Expansion Slot Utility settings
This section applies exclusively to the Apple Mac Pro produced in
2006 and 2007. Skip this section for Mac Pros from Early 2008 and
later as well as all other computers.
The Mac Pro (Intel Xeon-based) will detect changes in the PCI-e slot
configuration, it will automatically launch the Expansion Slot Utility
where you can make performance adjustments for the various PCI-e slots. The
utility can be manually started also, it can be found at: Under my Mac Pro:
/System/Library/CoreServices.
Ensure there is at least a x4 speed assignment for the slot where the RAID
Controller is installed (x8 is preferred), making sure also that your video
capture/playback card and video display card also get a sufficient x value.
Example below is a good balance, it shows the RAID Controller in slot 4, a
popular video capture card in slot 3, a eSATA adapter in slot 2, and the standard
graphic card in slot 1.
Page 17
Page 18