AoFrio Network Pro ONE Producthandleiding - Pagina 8
Blader online of download pdf Producthandleiding voor {categorie_naam} AoFrio Network Pro ONE. AoFrio Network Pro ONE 14 pagina's.
Ook voor AoFrio Network Pro ONE: Installatiehandleiding (16 pagina's)
Pagina afdrukkenInstallation, commissioning, and verification
Stage
Shipping
SIM card activation
Installation & mounting
Commissioning &
configuration
Verification
Operating modes
Normal operation
During normal operation, Network Pro ONE will perform
the following tasks:
•
Check-in to the AoFrio Cloud every 24 hours
to determine if new firmware or configuration is
available for download.
•
Acquire data from the AoFrio IoT device that it has
been paired with. Data will be uploaded to the
AoFrio Cloud periodically, typically at least every
24 hours.
•
Listen for alarms from the paired AoFrio IoT device
and upload data to the AoFrio Cloud immediately if
high priority alarms have been configured.
Details
Network Pro ONE ships from the factory in a deactivated state which ensures that its
backup battery is not in use and there are no radio emissions during transport. The
device only activates when external power is applied to it.
The SIM card installed in each device is appropriate for the country where it will be used.
Typically, the SIM card will be activated during the Network Pro ONE and/or asset
supply chain process.
If the SIM remains inactive prior to the asset's field installation, it will be activated if the
Network Pro ONE is paired with a device using the AoFrio Field app. This may take
several days depending on the scenario and timing.
Installation Guide.
Refer to the Network Pro ONE Installation Guide.
On first power-up Network Pro ONE will attempt to connect to the cellular network and
the AoFrio Cloud and download configuration and commissioning information. This
will happen automatically and will allow the Network Pro ONE to know which AoFrio
IoT device to track.
Only AoFrio Connect IoT devices associated with the same customer database will be
allowed to connect to the Network Pro ONE.
Network Pro ONE will also check for any new firmware updates at start up, and then
every 24 hours.
The AoFrio Field app can be used to verify the correct operation of Network Pro
ONE. Refer to the Network Pro ONE Installation Guide.
Refer to the Network Pro ONE
Battery powered operation
The device has a rechargeable internal battery that is
used for backup when external power is removed.
•
If fully charged the backup battery will continue to
operate the Network Pro ONE for approximately
12 hours.
•
When operating from the backup battery the
Network Pro ONE will continue to acquire data
from Connect IoT devices and send data to the
AoFrio Cloud until the battery is depleted.
•
Once the battery is depleted the Network Pro
ONE will turn off.
•
Network Pro ONE will reactivate once
reconnected to external power and then acquire
and upload data from the paired IoT device as
normal.
•
The backup battery will take 5-6 hours to fully
charge from a fully depleted state.
7